Digitalni mjerni uređaj za ravnost kontaktne mreže s digitalnim prikazom
Contact Info
- Adresa:, Poštanski broj:
- Kontakt: 王先生
- Tel:18910132037
- E-pošta:1322188373@qq.com
Ostali proizvodi
FTJP-3 digital display type catenary flatness measuring instrument
The digital display type catenary flatness measuring instrument can measure the flatness of the conductor, and can measure automatically without manual reading.
Display data unit: mm
Current status: The current operating status of the equipment
A: Real-time level of the catenary
B: Real-time displacement of the catenary
C: Displacement variation of the catenary
Technical parameters
1) Measuring range: 1000mm
2) Measuring accuracy: Grade 0
3) Applicable range: Applicable to various types of contact wires
Measuring process
1. Place the catenary in the equipment slot.
2. Start the equipment power switch.
3. After the system starts, the current status is "Initializing".
4. Wait for the initialization to complete, when the prompt "Ready" appears, the measurement operation can be carried out.
5. Press and hold the button for 3 seconds, the current status will change to "Start Measuring", and then enter the measurement mode to measure the catenary.
6. After the measurement is completed, press and hold the button for 3 seconds, the current status will change to "Measurement End".
Calibration process
1. Place the equipment on a horizontal surface.
2. Place a measuring block with a thickness of 1cm at the measuring position of the equipment.
3. Start the equipment.
4. Press and hold the button for 4 seconds in the initialization state, and the prompt "Calibration Completed" will appear.
| Industrijska kategorija: | Instruments & Meters/Measuring Instruments/Other Measuring Instruments |
|---|---|
| Kategorija proizvoda: | |
| Marka: | |
| Specifikacija: | |
| Zaliha: | |
| Porijeklo: |
